Search results

  1. H

    How is the C400 on the highway ? RPM at 60-65 mph

    i also put heavier weights in my C400x. stock is 15 grams and mine are now 16 grams. take-off is somewhat less 'sporty' but at least the rpms match the speed now. i would not go back to stock, it always felt like it was revving too high for the speed i was doing.
  2. H

    Gravel road/forest service road capable tires available?

    riding gravel will 'suck' with any non-nobby-tire. it takes some getting used to. but if you really want some nobby-like tyre, go for tkc-80 if this size is available for our scoots. (wich i doubt)
  3. H

    motoscan app

    offcourse, this is obvious. but nothing "special" to change/ program...
  4. H

    motoscan app

    anyone working with the motoscan app? i was wondering wha you can 'adjust' in settings with the app? all i was able (and needed) to do sofar,was reset the service warning. curious what else can be done with it. don't want to mess around and screw someting up. i have looked around (got the...
  5. H

    Pre-warm Seat and Grips

    now there's the 'problem' of you not feeling the warmth fast enough...
  6. H

    Pre-warm Seat and Grips

    start the bike sitting on center stand, not side stand.
  7. H

    HELP! C400x wont start

    did the repair shop tell you why it broke? how old was this scoot?
  8. H

    HELP! C400x wont start

    has this been fixed, i may hope so!
  9. H

    brand new C400X - stalls

    apparently this issue got solved with a serious software update, i cannot confirm myself since i don't have the latest update 022_008_020 did you buy the C400,
  10. H

    Whats the actual recommend octane?

    anyone having problems using fuel with 5-10% of ethanol on longterm basis? in europe we don't have fuel without ethanol anymore. on the fuelcap a sticker shows E5 and E10 so both of our fuel choices should be accepted. still ethanol is known for attacing rubber and plastic parts of the fuel...
  11. H

    Vibration / tictic sound at lower speed

    so today i got the variocase opened up. i may have found the cause of the '1/8 to quarter throttle' ticking noise. have a look at the vid and tell me what you think. first you see the vario in 'high gear' with very little play, then you see the vario in 'low gear' and there you have it... lots...
  12. H

    OBD2 Connector

    i found you need a unicarscan ucsi 2100 obd connector and install the motoscantool app on google playstore. unclear is you can reset it with the lite (free) version of the app or need to upgrade to the paying version (still cheaper then going to the stealership ;-)
  13. H

    high beam activating

    i thought i was the only idiot that didn't know this :LOL:
  14. H

    Vibration when turning and resonance

    the vibration issues got fixed thanks to a member here that pointed out to me the bolt that goes thrue the engine ,and the nut is under the exhaust. those cannot be tightened too hard. just snug and all vibrations were gone on mine, just with this alone.
  15. H

    high beam activating

    stupid question, but how do i actuate the high beam? with my left finger i can flash the high beam but it won't stay on upon release?
  16. H

    Vibration / tictic sound at lower speed

    imho it's the vario rollers. i have it too from about 25kph to about 55kph, but i've noticed that when i open the throttle more is goes away (more revs). is this also the case with all of you? sound does come from behind, left, so location of the vario. i'm opening up the case soon and i'll...
  17. H

    2021 C400X vibration ( fixed )

    thank you so much! for me it was the overtorque of the nut that made it vibrate worse. now just snug the nut and vibrations GONE completely ,super happy with this now.
  18. H

    OBD2 Connector

    with what kind of tool are you resetting this? is it a specific bmw tool or can a generic obd tool also read out fault codes?
  19. H

    Has anyone lowered a C400

    you could simply install shorter rear shocks if you can find some,but maybe you could also lower seat foam?
  20. H

    C400X idle adjustment on early model (2019?)

    can the idle be adjusted on the version that has the throttle cabels running to the throttle body? idle is around 1500rpm and i'd like to see it around 1600-1700rmp. thanks, hannes.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock
No Thanks