I'm the third owner of the c650 Gt , 44500Km ,2014 and changed the Variator belt recently. I took it all apart and been very careful, that I put all the parts back together the right way again. I cleaned the bell and clutch, rollers were ok and I just cleaned them. The front -variator " plate' had a spacer towards the gearbox ( around 5 mm).Put bell on, clutch with new belt. That is when I noticed that the front pully was not really in line with the clutch, so the belt was in a bit in an angle. My question is now is there also a spacer on the bell towards the engine, which would bring it forward in line? This bothers me for a while now. Because I'm the 3 rd owner it could " gone missing at one stage" ??
Tried youtube and I don't have a Manual. Any help would be much appreciated, to solve my question ( 1 spacer or 2, front and rear, or front only ). Thanks, Norman.
Tried youtube and I don't have a Manual. Any help would be much appreciated, to solve my question ( 1 spacer or 2, front and rear, or front only ). Thanks, Norman.
