• Welcome to the BMW Scooter Forums. Member registration disables ads and allows you to post and share. Register Here.

Where to obtain a Service Manual

ArmoredCow

ArmoredCow

New member
Joined
May 24, 2024
Messages
13
Location
Ohio
Visit site
Is there somewhere online that I can obtain the service manual for the 2024 C400GT?
I'm sure one for a previous year would work just as well for the 2024 but I can't seem to find any of those either.
 
@ArmoredCow (et al.):

The one that @mgg linked to above is the one that I bought in June 2022. It's labeled "BMW C400 GT K08" although I don't know which year that "08" part refers to; usually those numbers are incremented for each model year, at least in the brands that I'm familiar with.

By the way, question for all: as far as I know, the only thing that changed between the '22 C 400 GT and the '23 C 400 GT (I owned the former, and own the latter) is that the front brake calipers went from a silver to a gold color. Anyone know of any other differences? (Edit: oh, yeah, there may have been some bodywork color-choice changes, too.)
 
Last edited:
The 'K08' I believe is part of BMW's model designation. These K numbers show up in the Motoscan program and I've not been able to find a listing of what models/years correspond to which actual bike. I do know that, for the 650 scooters, there are different 'K' numbers and you have to select the correct one or Motoscan will not work correctly, yet I always have to guess which number K mine is. Bit annoying.
 
Ceesie76 said:
The 'K08' I believe is part of BMW's model designation. These K numbers show up in the Motoscan program and I've not been able to find a listing of what models/years correspond to which actual bike. I do know that, for the 650 scooters, there are different 'K' numbers and you have to select the correct one or Motoscan will not work correctly, yet I always have to guess which number K mine is. Bit annoying.
Click to expand...
Thank you very much
 
Torque Specs – BMW C400X (Loncin engine) – Flywheel & Cylinder Head Work

1. Flywheel (Crankshaft Nut)
Torque: 100–120 Nm
Recommended: 110 Nm
Use: Medium threadlocker (e.g. Loctite 243)

2. Cylinder Head Bolts (Tightening Sequence: Cross Pattern)
Step 1: 20 Nm
Step 2: 40 Nm
Step 3: +90° angle tighten

3. Camshaft Cap Bolts
Torque: 10–12 Nm

4. Camshaft Sprocket Bolt(s)
Torque: 20–25 Nm
Use: Medium threadlocker

5. Timing Chain Tensioner Bolts
Torque: 10–12 Nm

6. Valve Cover Bolts
Torque: 8–10 Nm

Please someone to help i have c400 x 2019

Is that numbers correct acoording to service manual??
The torque is the same with Gt model???
 
You must log in or register to reply here.
Back
Top