• Welcome to the BMW Scooter Forums. Member registration disables ads and allows you to post and share. Register Here.

Tucano Urbano Hand Grip Covers / Mitts / Muffs

Scoots you sir

New member
Joined
Mar 9, 2015
Messages
36
Location
Dublin, Ireland
Visit site
CAM00374r.webpCAM00376r.webpCAM00377r.webpCAM00378r.webp

I see there's been some posts about Tucano Urbano scooter coats / aprons so I thought you guys might like to see the mitts / muffs from the same maker I've just fitted.
They're the R333 model, which is a universal type but is a pretty good fit for my C600 (and presumably C650 too).

I have heated grips, but when it's really cold or raining I've always found mitts to be a godsend.

Some things to note:
For a good secure fit you need remove the bolts holding the handlebar weights on - they're massive M12 size and a torx key will not do the job. A torx bit (size T55) and ratchet is definitely required.
Two large washers are needed too which weren't supplied, so I had to source them myself.
I had to cut down the rubber cup on the right hand side so it wouldn't rub on the throttle.

The rigid design is good in that it stops them flapping about at speed and means they won't move backwards and tip the brake levers on you, but they can foul your arms a little when making large steering inputs.

My first post here - hope I haven't done anything wrong!
 
Do they close around your wrists?

They were supplied with closures around the wrists, but for the sake of safety I cut the fabric out. I've had frights before where I've been fiddling with my visor and suddenly needed to grab the brakes, only to get fouled up by the muffs.
I should have pointed that out - first thing I did when I got them two months ago, then forgot I'd done it!
 
Back
Top